QUICK CHANGE KNURLING TOOL HOLDERS
KNURLING, FACING AND TURNING
For turning and facing as well as knurling. Supplied with a set of high speed precision ground and lapped medium diamond knurls. Easily replaceable. Holder supplied with 2 knurls.
ADJUSTABLE KNURLING HOLDER
Excellent knurling, with approach adjustability, is provided with the newly designed #19 knurling holder. The #19 is selfcentering and is adjustable, providing the ideal near-vertical-axis approach angle for a wide range of stock diameters. Spindle and cross-slide reassure are minimal, thus knurling of thin wall tubing is easily performed.
The Aloris #19, which is designed for use in any standard turret tool post or other open-slot holder, is also available with dovetail mounting (series 19) to fit Aloris tool posts. Precision ground, 3/4" O.D. x 3/8" wide, high-speed medium diamond knurls are supplied unless otherwise specified.
ALORIS AT-20 COMBO CNC BAR PULLER KNURLING TOOL
Description
The Aloris AT-20 Bar Puller mounts into the tool slot on CNC turrets easily adjustable with knurls installed the range is 1/8"–2". Opposing forces on knurls create little or no force on the machine. Just remove the two knurl lock screws, replace with bar grippers and use as a heavy duty bar puller. There are no gripper springs to remove when changing bar diameters. Just loosen the lockscrew, insert allen wrench and dial to the next size, preload approximately 1/8 rev., lock locking screw. Furnished with 1" shank without knurls or grippers. Minimum clearance required between turret and covers is 3-3/8".
